Siding supplies in Barrie: aluminum and vinyl from Cranco

Cranco sells aluminum and vinyl siding, soffit, fascia, trim, flatstock and gutter coil to contractors from 556 Bryne Drive in Barrie, and from its Concord and Mississauga counters.

The aluminum flatstock and gutter coil are Gentek, made in Canada. The two flatstock colours contractors buy most from Cranco are black and iron ore.

Any colour in the manufacturer's range can be ordered. Call the Barrie counter to check the colour and quantity before you drive over.

Aluminum, vinyl and the screws to hang them

Aluminum siding, soffit, fascia and trim

  • Flatstock, Gentek: 24 in wide, 98.5 ft roll, 0.024 in, light gauge or heavy duty
  • Gutter coil, Gentek: 0.024 in standard or 0.027 in heavy gauge, in several widths and lengths
  • Horizontal siding: 8 in exposure, 12 ft 6 in long, smooth or woodgrain
  • Double 4 in clapboard: 12 ft 6 in long, standard or heavy gauge, smooth or woodgrain
  • Double 4 in Dutch lap: 12 ft 6 in long, standard or heavy gauge, woodgrain
  • Double 5 in Dutch lap: 8 in exposure, 12 ft 6 in long, woodgrain
  • Vertical siding: 8 in exposure, 10 ft long, smooth or woodgrain
  • Vertical V siding: 7 1/4 in exposure, 9 ft 7 3/8 in long, standard or heavy gauge
  • Soffit, solid or vented: 2-panel at 12 in exposure, 4-panel at 16 in, 3-panel at 18 in
  • Fascia: 4, 6 or 8 in, 9 ft 10 in long, ribbed, plain, smooth or woodgrain by width
  • J-trim: universal at 10 ft, 3/4 in and wideface at 12 ft
  • Outside corner post: 2 1/2 in face, 10 ft long, smooth or woodgrain
  • Roof edge at 3, 3 3/4 or 5 1/2 in wide, and L-trim at 1 1/8 in wide

Vinyl siding, soffit and trim

  • Double 4 in clapboard: 12 ft 6 in long, 0.040 to 0.046 in thick, cedargrain or hardwood
  • Double 4 in Dutch lap: 12 ft 6 in long, 0.042 to 0.046 in thick, cedargrain or driftwood
  • Double 4 1/2 in Dutch lap: 12 ft 1 in long, 0.040 or 0.046 in thick, cedargrain
  • Double 5 in clapboard: 12 ft long, 0.042 to 0.046 in thick, cedargrain or hardwood
  • Double 5 in Dutch lap: 12 ft or 16 ft 4 in long, 0.040 to 0.046 in thick
  • Double 6 in clapboard: 16 ft 8 in long, 0.046 in thick, cedargrain or hardwood
  • 7 in board and batten and 10 in vertical siding: 10 ft long, light roughsawn
  • Double 5 in soffit, solid or fully vented: 10 in exposure, 0.042 in thick
  • T-4 soffit, solid, hidden vent, centre vented or fully vented: 12 in exposure, 12 ft long
  • J-channel from 1/2 in to 2 1/2 in wide face, 10 or 12 ft long
  • Corner posts from 3 in to 6 in face, 10 to 20 ft long
  • Window and door surrounds at 3 1/2 or 5 in face, 20 ft long
  • Starter strip, F-channel, undersill trim and drip cap, 12 ft long

Screws and sealant to finish the job

Pan head screws, #6 by 5/8 in with a square #2 drive, come in boxes of 1,000 in nine colours: zinc plated, black, white, pebble, sandalwood, tan, iron ore, commercial brown and antique brown.

Mulco Flextra seals the exterior joints around siding, doors and window frames. It is a thermoplastic rubber sealant, tack-free in 2 minutes and resistant to rain as soon as it is applied.

Where can I buy siding supplies in Barrie?

Cranco sells aluminum and vinyl siding, soffit, fascia, trim, flatstock and gutter coil at 556 Bryne Drive, Unit 1, in Barrie. The counter is open 7:00 am to 4:00 pm, Monday to Friday.

Can Cranco order a siding colour it does not have at the counter?

Yes. Cranco can order any colour in the manufacturer's range. Call the counter to check before you drive over.

Does Cranco deliver siding in Barrie?

Yes. Cranco's trucks deliver to jobs within one to two hours of each counter. Call the Barrie counter to book a delivery.

The full aluminum and vinyl pages

Related comparisons and guides